Current best sellers

Special Offers

Rust-Oleum Combicolor Wrought Iron Finish Aerosol

New product

A one coat interior and exterior  maintenance system for metal with a wrought iron finish. Can be applied directly to rust and is sag resistant.

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537




- +

Product Info

RUST-OLEUM CombiColor Aerosols Wrought Iron 7300 are developed for decoration and protection of metal surfaces. It contains rust-inhibitive pigments for extra corrosion protection, is fast drying and creates an attractive wrought iron appearance. It contains rust-inhibitive pigments and is suitable for all types of bare, manually de-rusted metalwork such as decorative metalwork, industrial equipment and building components.

Attractive wrought iron appearance
Fast drying
Sag resistant
For interior and exterior use
Provides long lasting protection

Surface Preparation
Remove oil, grease and all other surface contamination with ND14 Cleaner Degreaser or high pressure (steam) cleaning. Remove rust scale, loose mill scale, loose rust and loose coatings by scraping and wire brushing, light blast cleaning or sanding.
Sand intact coatings to roughen the surface slightly.
The surface must be clean and dry during application.
Galvanised, Zinc and Aluminium surfaces need to be primed with Combi Adhesion Primer 3302.

Application and Thinning
Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use.
Hold the can approx. 25 cm from surface and use a back and forth motion keeping can parallel with work piece.
Ensure that can is in motion when spray button is pressed to avoid runs and sags.
Apply several thin layers at a few minutes interval to achieve adequate coating thickness.
After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.

Technical Data
Coverage Smooth
Finish Matt Satin
Solvent Based Yes
01.Drying Time (Touch Dry) 2 hours (1 hour aerosol)
02.Drying Time (To handle) 8 hours (2 hours aerosol)
03.Drying Time (Recoat) 16 hours (2 hour aerosol)
04.Drying Time (Full cure) 1 Week
Smooth Coverage (m2 / litre) 10.5 (2-3 m2 per can)
Type Single Pack
Flammable Yes
Application Method Brush, Roller,Aerosol
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:


* required fields


30 other products in the same category:


Compare 0