Current best sellers

Special Offers

Rust-Oleum Flexible Epoxy B95

New product

Outstanding corrosion protection in heavy industrial or coastal areas with the advantage of an elastic paint.

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537

ENTER COLOUR CHOICE:

loader

£320.50

- +

 
Product Info

RUST-OLEUM B95-Flexible Epoxy System is based on two-component, modified epoxy resins and is practically solvent free. It is formulated for application on concrete, masonry, and hand tool prepared, blasted, primed or galvanized steel. It provides excellent corrosion resistance in severe industrial and coastal exposures, high humidity and moisture conditions.

Virtually solvent free
Hard wearing and impact proof
Outstanding corrosion protection in heavy industrial or coastal areas
Semi gloss finish
Ideal for airless spray application
Low odour

Surface Preparation
Remove grease, oil and all other surface contaminations with ND14 or high pressure (steam) cleaning.Sand intact coatings to roughen the surface slightly. Check compatibility, especially when applied on reversible coatings (such as chlorinated rubber) on a test-patch is strongly recommended. The surface must be clean and dry during application.
Concrete and masonry: New concrete or masonry should cure and dry for at least 30 days before applying the coating system. Remove laitance, any loose or unsound concrete or deteriorated coatings. Smooth concrete should be roughened. Remove curing compounds.
Steel: Remove loose rust, mill scale and deteriorated coatings by hand or power tool cleaning.
Large areas may be thoroughly blast-cleaned

Application and Thinning
Brush: 10 to 15 vol.%; Thinner 160.
Use natural bristles, long hair brushes.
Roller: 10 to 15 vol.%; Thinner 160.
Use medium pile polyamide (perlon 16 - 20 mm.) rollers.
Roller application requires 2 coats to achieve recommended dry film thickness
Airless spray: 5 to 15 vol.%; Thinner 160.
Pneumatic and electric airless equipment. Tip size: 0.015-0.025 inch.
Fluid pressure: 250 - 300 bar.

 
Technical Data
Coverage Smooth
Finish Semi Gloss
Waterbased Yes
01.Drying Time (Touch Dry) 8 hours
02.Drying Time (To handle) 12 hours
03.Drying Time (Recoat) 24 hours
04.Drying Time (Full cure) 8 days
Smooth Coverage (m2 / litre) 6.6
Type Two Pack
Application Method Brush, Roller, Spray
 
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:

loader

* required fields

30 other products in the same category:

Menu

Top
Compare 0