Current best sellers

Special Offers

Rust-Oleum Epoxy Finish 9100

New product

A hard wearing epoxy coating offering twice the coating thickness than standard epoxy systems, for long lasting results with a single coat application - even over rusty surfaces.

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537




- +

Product Info

Please note that due to the current Coronavirus situation, all Rust-Oleum products are subject to a 10 day lead time.

With excellent results with minimal surface preparation and a single coat application, Rust-Oleum 9100 Epoxy System saves preparation and application time to provide a highly durable and abrasion resistant finish with exceptional flow and colour intensity. Suitable for areas where there may be frequent cleaning with chemicals.

Single coat application directly over rusted metal
Excellent results with minimal surface preparation
Very resistant to abrasion
Available in over 15000 colours
Full colour intensity in one coat
Suitable for frequent cleaning with chemicals

Surface Preparation
Remove grease, oil and all other surface contaminations with ND14 cleaner degreaser or high pressure (steam) cleaning.
Sand previous coatings, which are in good condition to remove gloss and to roughen the surface slightly, check compatibility. The surface must be clean and dry during application.
Steel: Remove loose rust, mill scale and deteriorated coatings by hand or power tool cleaning to St 2/3 (ISO 8501-01 : 1988). Large areas may be brush-off blasted
For immersion purposes, prepare to Sa 3 (ISO 8501-01 : 1988), blast profile max. 75 µm.

Application and Thinning
Brush/Roller, Use natural bristle, long hair brushes or medium pile polyamide (per-lon)
16-20 mm rollers. Roller application requires 2 coats to achieve recommended Dry film thickness.
Airless spray: Pneumatic and electric airless equipment.
Tip size: 0.013-0.021 inch.
Fluid pressure: 150 - 225 bar.
Avoid excessive film thickness.


Technical Data
Coverage Smooth
Finish High Gloss
Solvent Based Yes
01.Drying Time (Touch Dry) 6 hours
02.Drying Time (To handle) 12 hours
03.Drying Time (Recoat) 16-72 hours
04.Drying Time (Full cure) 1 Week
Smooth Coverage (m2 / litre) 6
Type Two Pack
Application Method Brush, Roller, Spray
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:


* required fields

30 other products in the same category:


Compare 0