Rust-Oleum Noxyde

New product

The ultimate in corrosion and waterproofing protection, for long lasting durability!

Satin Gloss Finish

More details

Product Info

Please note that due to the current Coronavirus situation, all Rust-Oleum products are subject to a 10 day lead time.

Rust-Oleum NOXYDE is premium water based, easy-to-use product ideal for long-term corrosion protection of metal surfaces. Its unique formulation performs like no other coating available and offers unsurpassed rust, corrosion and water protection. It is an excellent over-coat and an alternative to sandblasting.
The use of primers and other finishing paints are not needed when using Noxyde to decorate and protect steelwork.

Flexible – protecting the film against cracking, peeling and protection from abrasion and knocks

  1. High adhesion preventing rust from spreading
  2. Provides Excellent Edge Coverage, protecting areas that are subject to more abuse
  3. Contains Anti-Corrosive Pigments providing additional protection against corrosion
  4. Requires Minimal Surface Preparation 
  5. Resists long–term UV degradation 

Surface Preparation
The substrate has to be dust and rust free by sandblasting or high pressure water jetting.
After jetting, the substrate has to be dust free.
On new galvanised surfaces, new zinc, aluminium, stainless steel, apply a coat of Galvaprim or Pegalink.
On ferrous substrates, apply Noxyde in red or grey as the first coat. Then apply contrasting Noxyde colours for subsequent layers.

Application and Thinning
Brush and roller, Use undiluted as a rust preventive paint and diluted with approximately 25% water if being used as an adhesion primer (consumption about 100 g/m2).
Airless spray: Use undiluted.
Nozzle: 13 - 17 / Pressure: minimum 170 bars.
Nozzle and pressure can vary depending on the type of substrate, equipment and the experience of the applicator.

Need to Repaint Metal Cladding?

Find out how to renovate metal cladding using the Noxyde with this short video from RustOleum:

Technical Data
Finish Satin
Waterbased Yes
01.Drying Time (Touch Dry) 1.5 hours
02.Drying Time (To handle) 3 hours
03.Drying Time (Recoat) 24 hours
04.Drying Time (Full cure) 2 Weeks
Application Method Brush,Roller,Spray
Single / Two Pack Single
Coverage (Smooth) 0.2-0.5 kg/m2
Colour Tinted to specification
Base Water based


30 other products in the same category:


Compare 0