Please note that due to the current Coronavirus situation, all Rust-Oleum products are subject to a 10 day lead time.
A high performance acrylic exterior / interior coating. Suitable for application to old or new masonry, cement rendering or plaster, concrete, tiles, plaster board and wooden panels.
Satin Matt finish
Easy to clean
High covering power
Water vapour permeable
Water and weather resistant
The substrate must be sufficiently dry and stable; clean thoroughly with ND14 Cleaner Degreaser.
In case of fungal growth: treat first with AMW mould removal solution.
On porous substrates and chalking surfaces apply first a coat of Hydrosol or stabilisong solution.
On very smooth bricks, apply a first coat of Noxyde diluted with 25% water, or a coat of Pegalink.
Fill surface defects, seal joints or cracks
Flat down and remove dust.
Apply 1 - 2 coats of Paracem.
Brush: Apply with a masonry brush.
Roller: Apply with dispersion roller.
Air-atomised spray: Dilute with water (3 - 5%).
Airless spray: Nozzle: 013 - 018 / Pressure: 180 bars.
For exterior use: do not dilute.
For inside use: dilute with 5 to 10% of water