Please note that due to the current Coronavirus situation, all Rust-Oleum products are subject to a 10 day lead time.
RustOleum Fassilux Aqua: Waterbased Paint for Interior Woodwork
The RustOleum Fassilux Aqua XPE is tough finish paint for interior woodwork. Its hard-wearing and durable finish makes it perfect for painting kitchen cabinetry, radiators, doors, trims and furniture.
The Fassilux Aqua has three finishes, Matt, Satin, Gloss and all are available in any colour including BS, RAL, NSC and Decorative Paint Colour Collections. And, the Satin and Gloss finishes can also be used for exterior woodwork too.
Based on a polyurethane/alkyd emulsion is as easy to use as traditional oil based furniture paints but with all the benefits and advantages of a water based formula. The Fassilux Aqua XPE is easy and fast to apply with its excellent flow properties and coverage rates to ensure an even and professional finish for every project.
Features of the Rustoleum Fassilux Aqua:
- Quick Drying
- Waterbased Formula
- Low odour and low VOC content
- Easy to apply
- Excellent flow and leveling characteristics
- Superior Scratch Resistance
- Non-yellowing and colour fast finish
- Excellent adhesion, opacity and flexibility
Preparation and Application.
For optimum results, surfaces must be clean, dry, and free from grease, dirt, oil, wax, rust, loose material and surface contamination. Use recommended RustOleum cleanng solutions. Treat knots and resinous areas with RustOleum Pegaprim Isofix
Use a good quality filler such a Prestonett flexible filler for filling cracks, nail holes, blemishes and for levelling uneven surfaces.
Ensure that existing painted and filled surfaces are thoroughly sanded smooth.
Note: Discoloration of paint, especially noticeable within light colours, may occur over knots and resinous areas present in the wood.
Particular attention with regards to preparation should be given to wood such as oak, teak, cedar, douglas fir, mahogany and idigbo which contain oil and water-soluble tannin which may impair the drying, hardening or adhesion of surface coatings and discolour the finished surface.
Prime bare interior wood overall and, if necessary, spot prime all bare areas on previously painted surfaces with RustOleum Pegalink Primer or RustOleum Pegaprim Isofix. Pegaprim Isofix is preferable on wood that contains substances which may ‘bleed through’ and cause staining to the finished surface.
Application and Thinning
- Apply by brush, roller or spray.
- Polyester and nylon paint brushes are best suited for the application of Fassilux Aqua XPE.
- For airless spray use a 0.013” – 0.015” spray tip.
- Thinning: if necessary thin by up to 5% with water.
- Touch Dry: 3 Hours
- Recoat: 24 Hours
- Full Hardness: 1 Week