Top sellers

Teknos Futura 15%, 40%, 90% gloss Oil Based Paint for Wood

New product

Futura paints are high performance, urethane alkyd furniture paints that are thixotropic and therefore easy to apply.

Available in Semi-matt (Futura 15), Semi-gloss (Futura 40), Full Gloss (Futura 90).

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537

ENTER COLOUR CHOICE:

loader

£16.10

- +

Brand: Teknos

 
Product Info

Futura paints are high performance, urethane alkyd furniture paints that are thixotropic and therefore easy to apply.

Available in Semi-matt (Futura 15), Semi-gloss (Futura 40), Full Gloss (Futura 90).

Futura 15 (Semi-matt) is for painting wooden and primed metal detached furniture indoors.

Futura 40 (Semi-gloss) and Futura 90 (Full Gloss) are both suitable for top coating wooden and primed metal surfaces on detached furniture both indoors and outdoors. Note: Futura 40 - avoid using dark colours outdoors.

Surface Preparation

The surface to be painted must be clean. Wash previously painted surfaces with RENSA SUPER paint cleaner. Remove loose and poorly adherent paint coats. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Use Futura 3 Adhesion primer to prime unpainted wooden, chipboard and also surfaces that have been painted with alkyd, oil or acid-curing paint. Stop up pits and crevices with carpentry Filler. Matt down the surfaces and remove the dust.

In addition for Futura 15 remove loose old paint from interior metal surfaces by scraping and wire-brushing. Clean off all rust with wire-brush. Wash the surfaces with white spirit. Prime steel surfaces with Futura 3 Primer and zinc-coated and aluminium surfaces with Kirjo. Topcoat all metal surfaces with 1 - 2 coats of Futura 15.

 Application

Futura 40 and 90

Prime the metal surfaces with Anticorrosive Paint. Prime unpainted wooden and chipboard and surfaces that have been painted with alkyd, oil or acid-curing paint with FUTURA 3 Adhesion primer.

Futura 15, 40 and 90

The paints are thixotropic and must be stirred thoroughly before use. Apply by brush, roller or spray. Suitable airless spray nozzle is 0.011 - 0.013". When applying by spray, thin the paint 5 - 15 % by volume with TEKNOSOLV 9500. When a second coat is required, it can be applied on the following day.

Application Conditions

The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint should be above +5 °C and the relative air humidity below 80 %.

 
Technical Data
Coverage 8-12 m2/l - all
Application Brush, roller or spray
Solvent Based solvent-borne
01.Drying Time (Touch Dry) 3 hours - Futura 15, 4 hours - Futura 40 and 90
03.Drying Time (Recoat) Next day - all
Thinning white spirit
Clean Up white spirit
 
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:

loader

* required fields

Accessories

30 other products in the same category:

Menu

Top
Compare 0