Polyvine Heavy Duty Floor Varnish


Ultra tough crystal clear protection for interior floors

Ideal for: wooden floors, cork tiles, stone, slate, brick, quarry tiles, wooden worktops

Finishes: Dead Flat, Satin

Size: 100ml, 1L, 2L, 4L

£4.82 (excl VAT)
  • 100ml
  • 1L
  • 2L
  • 4L
  • Dead Flat
  • Satin

About Polyvine Heavy Duty Floor Varnish

An ultra hard, high quality coating with a satin or dead flat finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained. Formulated for floors and areas of high wear.

When using dead flat finish, if a very high level of durability and stain resistance is required, apply one or two coats of Floor Varnish Satin Finish followed by one or two coats of Floor Varnish Dead Flat Finish.

Key Features

  • Suitable for interior use
  • Quick drying
  • Cures fast - 16hrs
  • Water resistant
  • Stain resistant
  • Abrasion resistant
  • Heat resistant
  • Chemical resistant
  • Ultra hard
  • Clear as glass
  • Resistant to heel marks
  • Sands to a high-grade finish
  • Easy to apply
  • Food and child safe
  • Wash brushes in water


Thoroughly sand in the direction of the grain to remove all traces of old finishes and dirt, oil and contamination. Old floors can be impregnated with wax and grease - this will cause failure and must be completely removed. On new wood or if the old finish is in good condition, lightly sand to provide a key. Thoroughly clean after sanding.


Ensure the product is well mixed. Apply 3 coats of varnish. On new wood and porous surfaces dilute the first coat 10% with water. Lightly sand wood in between applications to remove any raising of the grain that may have occurred.

Drying Times and Coverage

Drying time: 30-60 minutes
Recoat time: 1-2 hours
Curing time: 16 hours in ideal conditions. Allow 48hrs before heavy use.
Coverage: 10-20 square metres per litre.


Always apply to a test area before starting work. Appearance may vary according to the colour and type of wood and the number of coats.

Do not apply over uncured oil paints.


Protect from extremes of temperature during storage and application. Do not use below 5 degrees C.

Health, safety and the environment

  • Non-hazardous. Ensure good ventilation.
  • Keep out of reach of children.
  • Contact with eyes - wash immediately with warm water.
  • Remove excess from tools and mixing vessels before washing in warm soapy water.
  • Do not empty into drains or watercourses.
Drying Time - Touch Dry
Drying Time - Recoat
Drying Time - Full Cure
Coverage (m2 / litre)

Be the first to ask a question about this product!

Question about the product

* Required fields
Send Question
Colour Charts
Recently Viewed



Need help? Call 01793 511537