Top sellers

Rust-Oleum Epoxyshield Sealer

New product

Epoxyshield Sealer -The Performance Dust-Proofer - water based, quick drying, cost effective 

More details

£41.69

- +

 
Product Info

EpoxyShield Sealer is a 1-component, concrete protector. It has excellent penetrating properties and good durability for light traffic.It protects the floor against liquid / chemicals and simplifies cleaning.

Single pack, easy to apply
Non yellowing clear finish (gloss)
Protects against moisture and road salts
Touch dry after just 1 hour
Ideal primer for EpoxyShield ULTRA coatings

Surface Preparation
Apply the product only on fully clean and dry concrete surfaces.
Do not apply on smooth or very dense concrete or concrete which contains curing compound.
Remove all oil, grease and other dirt using ND14 Cleaner Degreaser.
New concrete needs to cure for minimum of 30 days.
Loose or unsound concrete should be removed by blasting, cutting or etching with RUST-OLEUM Surfa-Etch 108 Etching Solution.
Repair all holes and cracks with Rust-Oleum concrete repair products.
Very dense and smooth concrete should first be abrasive blasted, or primed with Rust-Oleum 333 Adhesion Primer. During application the substrate should be clean and dry.
When EpoxyShield Sealer is used as a finish, apply 2 coats.
EpoxyShield Sealer can also be used as a sealer/impregnation primer for EpoxyShield® 5200 ULTRA. Apply the sealer on bare and clean concrete floors.

Application and Thinning
Brush, product is ready for use. Thinning is not necessary.
Roller, product is ready for use. Thinning is not necessary.

 
Technical Data
Coverage Smooth
Finish Gloss
Waterbased Yes
01.Drying Time (Touch Dry) 1 hours
02.Drying Time (To handle) 6 hours
03.Drying Time (Recoat) 6 hours
04.Drying Time (Full cure) 12 hours
Smooth Coverage (m2 / litre) 10
Type Single Pack
Application Method Brush, Roller
 
Download

Expoxyshield Sealer

Health and Safety Data Sheet

Download PDF

Accessories

30 other products in the same category:

Menu

Top
Compare 0