Rust-Oleum Hard Hat Spot Marking Aerosol 2800
Spotmarking aerosols in RAL traffic Yellow, Red and White.
Suitable for use use on metal, concrete, asphalt, gravel, soil and grass, etc.
Optimised for ground marking.
Extra large 750ml can for more linear metres.
Two finger nozzle for accurate writing.
Quick drying (5 - 10 minutes).
About Rust-Oleum Hard Hat Spot Marking Aerosol 2800
For quick and easy marking of construction and excavation sites, underground utilities and for traffic safety.
Otimised for ground marking.
By means of the 360° valve the aerosol is sprayable in all directions.
Spot Marking Aerosol 2800 is based on a fast drying acrylic resin.
All products in this range are aromatic free and based on lead free and chromate free pigments.
Surface Preparation
Remove dirt, grease, oil and all other surface contaminants using ND14 Cleaner Degreaser.
The surface must be clean and dry during application.
Application
Remove cover cap and shake vigorously for at least one minute after the rattle of mixing ball is heard.
Shake frequently during use. It is not possible to clean the spray button in the usual way.
Due to the use of the 360° valve this is not necessary.
- Drying Time - Touch Dry
- 20mins
- Drying Time - To Handle
- 4hrs
- Drying Time - Recoat
- less than 1hr to more than 48hrs
- Drying Time - Full Cure
- 3 Days
- Coverage
- 70 linear metres
- Application
- Aerosol
- Single / Two Pack
- Single
- Finish
- Matt
- Solvent Based
- Yes