Ensure surfaces are clean, dry and free from dust and loose material. Cover nail and screw heads with an oil based primer to prevent rusting.
Remove cap and cut nozzle at an angle and size suitable for the size of the repair. Squeeze filler directly into the gap and smooth with a filling knife. Smooth the final layer with a wet filling knife. Allow the final layer to dry for at least one hour before sanding. Drying time can vary depending on depth of fill and site conditions. For external use seal the repair with oil based paint. Do not use in temperatures below 5°C or externally when rain is imminent. not suitable for use in areas subject to continuous water immersion. For deep cavities buildup using layers of 6mm, allowing each layer to dry.
Cleaning and Storage
Replace cap firmly after use. Wash hands with soap and water after use. All tools should be cleaned immediately after use with warm water. Store in cool, dry conditions. Protect from frost.
Avoid contact with eyes. In case of contact rinse immediately with plenty of water and seek medical advice. Keep out of reach of children.