Current best sellers

Special Offers

New

Polyvine Exterior Wood Varnish

New product

A non-yellowing, quick drying clear finish that protects against UV light and weather damage.

Ideal for: exterior doors, windows, woodwork, garden furniture

Finishes: Dead Flat, Satin

Size: 500ml, 1L, 2.5L

More details

£10.97

- +

Brand: Polyvine

 
Product Info

About Polyvine Exterior Wood Varnish

A waterproof, microporous, UV resistant clear protection for exterior wood.
The unique polymer system gives a silky satin finish and highlights the natural grain of the wood. It is suitable for exterior softwood and hardwood timber applications, giving a high level of UV resistance, waterproofing and preservation.

Available in satin and dead flat.

To achieve a fully protected dead flat finish apply 3 coats of satin before a final coat of dead flat.

Key Features

  • UV protective filters
  • Waterproof
  • Quick drying
  • Microporous
  • Resists blistering and cracking
  • High solids
  • Biocides protect againt algae, mildew and fungal attack
  • Exterior use
  • Nano technology

Preparation

All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils/resins from oily hardwoods and resinous softwoods. Treat new wood with a wood preservative to remove all traces of fungus and mould. Ensure pretreatment is compatible and completely dry, before application. Joints, end grain and glazing beads must be completely sealed. Water penetration into the timber will produce unsightly water staining and promote fungal growth beneath the clear varnish. Instructions in the technical data sheet must be followed. Ensure the product is well mixed.

Application

Using a good quality brush, apply evenly using light brush strokes, following the grain of the wood. Keep a wet edge and avoid overlaps. Apply the first coat and allow to dry. On new wood dilute the first coat with 10% water. Sand lightly to obtain the best finish. Apply three coats.

Drying Times and Coverage

Drying time: 1-2 hours
Recoat time: 4 hours
Coverage: 15 square metres per litre

Caution

Always apply to a test area before starting work. Care must be taken when applying in high temperature or direct sunlight as this will affect drying time. Do not apply when rain is imminent. Coating life will be reduced on horizontal surfaces and where the coating is in contact with the ground or pooled water.

Storage

Protect from extremes of temperature during storage and application.

Health, safety and the environment

  • Keep out of reach of children.
  • Non-hazardous.
  • Ensure good ventilation.
  • Contact with eyes - wash immediately with warm water.
  • Remove excess from tools and mixing vessels before washing in warm soapy water.
  • Do not empty into drains or watercourses.

30 other products in the same category:

Menu

Top
Compare 0