Tikkurila Valtti Teho

New product

Tikkurila Valtti Teho is a traditional and high quality solvent based paint for exterior wood work. 

With high durability, good weather resistance, and flexibility. 

Ideal for use on; timber cladding, weather-boarding, doors, windows, sheds, conservatories and garden furniture.

Semi-Gloss Finish, available in all colours. 

Brush or Spray Application. 


More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537



Product Info

Tikkurila Valtti Teho

Tikkurila Valtti Teho is a high performance thixotropic oil-based paint for use on exterior wood. Offers good weather resistance, flexibility and durability. Also contains linseed oil. 

Ideal for use on timber cladding, weather-boarding, doors, windows, sheds, garden furniture and can be used for repainting surfaces previously coated with alkyd paints and wood stains.

Attractive semi-gloss finish, available in all colours. 

Apply by brush or spray. 

Surface Preparation
For best results and prior to application of the Teho, ensure surfaces must be clean, dry, and free from grease, dirt, oil, wax, rust, loose material and surface contamination. Use Tikkurila products for mould removal and cleaning.

Treat knots and resinous areas with Tikkurila Knotting Lacquer. Use recommended Tikkurila fillers for filling cracks, nail holes, blemishes, etc.
Ensure that existing glossy, gloss painted and filled surfaces are thoroughly flatted down.

Note: Discoloration of paint especially noticeable within light colours may occur over knots and resinous areas present in the wood. Particular attention with regards to preparation should be given to wood such as Oak, Teak, Cedar, Douglas Fir, Mahogany and Idigbo, etc., which contain oil and water-soluble tannin which may impair the drying, hardening or adhesion of surface coatings and discolour the finished surface.

Prime new bare wood overall and spot prime all bare areas on previously painted wood with Valtti Base Priming Oil. Use Otex Adhesion Primer on wood that contains substances which may ‘bleed through’ and cause staining to the finished surface.

Prime all bare metal and potential rust spots with Rostex Metal Primer.

Note: A priming coat of Valtti Base should be applied to all exterior wood which has not been pre-treated or vacuum impregnated with an approved wood preservative.

Application and Thinning
Apply liberally on end-grain.
Methods: brush or spray application.
Thinning: if necessary by up to 5% with white spirit

Technical Data
Finish Semi-Gloss
Solvent Based Yes
01.Drying Time (Touch Dry) 12 hours
03.Drying Time (Recoat) 24 hours
Smooth Coverage (m2 / litre) 8-12
Type Single Pack
Application Method Brush, Spray
Rough Coverage (m2 / litre) 4-8
Thinning max 5% white spirit

PDS Teho

Product Data Sheet for Tikkurila Teho

Download PDF
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:


* required fields


30 other products in the same category:


Compare 0