Exterior Woodwork, Paint & Semi-Transparent Finishes
- Paints & Finishes For Interior Walls
- Exterior Woodwork, Paint & Semi-Transparent Finishes
- Interior Woodwork, Paints, Stains & Lacquers
- Paints & Coatings for Exterior Walls
- High Performance Woodwork Repairs
- Paints for Furniture & Kitchen Cabinets
- Tikkurila Feelings Paint Range
- Special Effects Paint
- Factory Applied, Interior Lacquers, Woodstains & Enamels
- Floor Paints & Clear Sealers
- Floor Repairs
- Coatings For Cladding & Waterproofing
- Roofing Repairs
- Metal Primers & Topcoats
- Hygienic Coatings
- Paints for Glass & Plastics
- Non-slip Floor Components
- Cleaning & De-Greasing Products
- Tools & Decorating Consumables
- Temporary Peelable Coatings
- Brochures, Colour Cards and Colour Fans
Current best sellers
Rust-Oleum Pegaprim Isofix - Shellac Stain Blocker
Pegaprim Isofix by RustOleum Mathys is the ultimate primer to seal and mask stained surfaces.
Effectively mask stains such as nicotine, water stains, knots and soot.
Excellent adhesion on a variety of surfaces.
For a better depth of colour overall, this primer can be tinted to pastel and medium colours.
The Pegaprim Isofix is suitable for Interior and Exterior use.
Please note that due to the current Coronavirus situation, all Rust-Oleum products are subject to a 10 day lead time.
The Pegaprim Isofix primer by RustOleum Mathys is a high performance, ultra sealing and fast drying universal adhesion primer.
Based on solvent borne shellac-resins, it has excellent adhesion to copper, bronze, stainless steel and on smooth hard surfaces old paints, masonry, plaster and laminates.
The Pegaprim Isofix also has exceptional sealing and masking properties to cover stained surfaces. Effectively mask stains such as nicotine, soot, water stains and knots and mask odours.
Key Product Properties:
- Very fast drying
- For interior and exterior use
- Good adhering paint film
- Masks odours
- Seals nicotine, soot and water stains
- Re-coatable with most water and solvent borne decorative paints.
- Can be applied at freezing temperatures.
Surface Preparation
The substrate should be cleaned and degreased and dry and stable.
Remove any surface contamination a thoroughly as possible.
Then sand lightly to create a key.
Strongly solvent borne topcoats must be tested for their tolerance first (e.g. polyurethane, epoxy finishes).
Application and Thinning
Brush: Apply undiluted.
Roller: Apply undiluted.
Air-atomised spray: Dilute with ± 2% denaturised alcohol.
Airless spray: Nozzle: 0.015 inch / Pressure: 150 - 200 bars
The kitchen as featured above is a project completed by Martin Guest of the Traditional Painters.
You can find out more about this project, Martins Work, and his use of the Pegaprim Isofix Here:
Or visit Martins website here:
