About Sikkens Cetol WP 562 BPD Blue Stain Resistant Penetrating Primer

Sikkens Cetol WP 567 BPD Primes and impregnates in one applicaton

Use directly from the container

Penetrates deep into the timber

Good run off properties

Good UV protection  

Application Method  

Apply either by deluge spraying and brushing, ideally dipping or flow coating.

Working viscosity is approximately  11 seconds in a DIN cup 4 mm i.e. approx. 23 - 25 seconds in a ISO cup 3 mm at 20° C material temperature.  

Brushing machine, vacuum coater Consumption 50 - 160 ml/m², depending on application method, type and absorption properties of wood (exact values must be established through a sample)    

Do not thin

Application temperature  15-25 °C for substrate, air and material at approx.60 % R.H.

Drying times  

At standard atmosphere of 23 °C / 50 % rel. humidity of air DIN 50014

Dust-dry  after approx. 30 minutes Over paint  after approx. 4 - 6 hours with waterborne products  

Cleaning of equipment    

Clean directly after use with water or washing up liquid or with ST 830 Cleaning Agent.

A dipping tank containing material must be covered correctly and stirred or circulated regularly.  

Packaging Disposal  

Only residue emptied cans can be disposed via recycling. Liquid wastes must be disposed of according to national regulations or according to EU-disposal key 03 02 02.  

Hazard Identification  

In accordance with EC guidelines - Warning.  The Impregnation serves as a protection of none statically subjected wooden constructions without earth contact, exterior, against blue stain and rot according to DIN 68800, part 3.

Not for use with wood which has got direct contact with food or food preparation.  

Dipping tanks or reservoirs 

When using metal reservoirs, we recommend using none rusting steel i.e. V2A, the use of other materials can lead to corrosion. Biocide products must be handled carefully   VOC guideline  EU limit value for this product (Kat. A/f): 150 g/l (2007)/130 g/l (2010). This product contains max. 80 g/l VOC.

Active ingredient

The active substance are notified according to . guildlines 98/8/EG. and according to the specification EN 599 against blue stain and rot.

BAUA-register Nr. 40653 0,6 g/100 g propinylbutylcarbamate iodine 0,9 g/100 g propiconazol 0,3 g/100 g Tebuconazal  

Wood protection agents must be registered according to the BPD. (BPD = Biocide Product Directive)

Uptake consumption

The examination follows the uptake value: 120-160 ml/m² i.e. 123-164 g/m² for timber in the resistance classes 3-5