Sikkens Cetol WP 567 BPD Impregnating Primer

Brand:
Reference:
NWP567

A translucent, impregnating base stain for protection against bluestain, fungi and rotting on exterior wooden components.

Impregnates and Primes in one coat.

Available in clear (colourless) and a number of approved colours from the Sikkens Classic Colours Collection.

Can be used under paints and semi-transparent wood finishes.   

Part of the High Performance Sikkens Professional Joinery range

£12.60 (excl VAT)
£15.12 (incl VAT)
£12.60 (tax excl.)
Size
  • 1L
  • 2.7L
  • 5L
  • 20L
Colour
  • Clear
  • Light Oak
Description

About Sikkens Cetol WP 567 BPD Impregnating Primer

Cetol WP 567 BPD is a translucent, impregnating base stain for protection against bluestain, fungi and rotting on exterior timber components.

  • Primes and impregnates in one
  • Ready to use from the container
  • Penetrates deep into the timber
  • Good run off properties
  • Good UV protection     

Application Method  

Deluge spray or brush, ideally dipping or flow coating.

Working viscosity is approximately  11 seconds in a DIN cup 4 mm i.e. approx. 23 - 25 seconds in a ISO cup 3 mm at 20° C material temperature.  

Brushing machine, vacuum coater Consumption 50 - 160 ml/m², depending on application method, type and absorption properties of wood (exact values must be established through a sample)    

Do not thin

Application temperature  15-25 °C for substrate, air and material at approx.60 % R.H.

Drying times at standard atmosphere of 23 °C / 50% rel. humidity of air DIN 50014 

Dust-dry  after approx. 30 minutes

Over paint  after approx. 4 - 6 hours with waterborne semi-transparent or opaque finishesproducts  

Cleaning of Equipment    

Clean directly after use with water or washing up liquid or with ST 830* (cleaning agent).

A dipping tank containing material must be covered correctly and stirred or circulated regularly.  

Packaging Disposal  

Only residue emptied cans can be disposed via recycling.

Liquid wastes must be disposed of according to national regulations or according to EU-disposal key 03 02 02.  

Hazard identification, in accordance with EC guidelines.

Warning.  The Impregnation serves as a protection of none statically subjected wooden constructions without earth contact, exterior, against blue stain and rot according to DIN 68800, part 3.

Not for use with wood which has got direct contact with food or food preparation.  

Dipping tanks or reservoirs  When using metal reservoirs, we recommend using none rusting steel i.e. V2A, the use of other materials can lead to corrosion.

Biocide products must be handled carefully.   

VOC guideline  

EU limit value for this product (Kat. A/f): 150 g/l (2007)/130 g/l (2010). This product contains max. 80 g/l VOC.      

Active ingredient

The active substance are notified acc. guildlines 98/8/EG. and according to the specification EN 599 against blue stain and rot.

BAUA-register Nr. 40653 0,6 g/100 g propinylbutylcarbamate iodine 0,9 g/100 g propiconazol 0,3 g/100 g Tebuconazal  

Wood protection agents must be registered according to the BPD. (BPD = Biocide Product Directive)

Uptake consumption

The examination follows the uptake value: 120-160 ml/m² i.e. 123-164 g/m² for timber in the resistance classes 3-5 

Features
NWP567
Reviews
No comments

Review this Product

  • Product Rating:
Colour Charts
FAQS

Be the first to ask a question about this product!


Question about the product

* Required fields
Send Question
Recently Viewed
Exterior Wood
£12.60 (excl VAT)
£15.12 (incl VAT)
£12.60 (tax excl.)
A translucent, impregnating base stain for protection against bluestain, fungi and rotting on exterior wooden components. Impregnates and Primes in one coat. Available in clear (colourless) and a number of approved...

Menu

Settings

Need help? Call 01793 511537