Sikkens Cetol WF 960 Translucent Semi-Matt Mid & Topcoat

Reference:
NWF960

A high durability translucent water-borne, Semi-Matt midcoat and finish for timber constructions.

Exterior and Interior use

Ideal for application on Accoya

Easy to apply

Very good weather resistance 

Tested according to DIN EN 71 Part 3 "Safety of toys" 

Available in Colour Range 36 translucent shades from the Sikkens Cetol Natural Balance Colour Collection 

Part of the High Performance Sikkens Professional Joinery range 


 

£17.06 (excl VAT)
£20.47 (incl VAT)
£17.06 (tax excl.)
Colour choice
Please enter your required colour into the box below and click 'Save Colour Choice'.
  • 250 char. max

    Your Colour:

Size
  • 1L
  • 5L
  • 20L
Finish
  • Semi-Matt
Close
Description

About Sikkens Cetol WF 960 Translucent Semi-Matt Mid & Topcoat

A highly durable translucent water-borne, Semi-Matt Midcoat and Topcoat with exceptional clarity and colour.

  • Specially formulated for application by spraying 
  • Virtually eliminates blocking 
  • Quicker hard drying 
  • Improved impact resistance 
  • Excellent flexibility 
  • Excellent weather resistance 
  • Excellent adhesion to suitably base stained timber 
  • Moisture vapour permeable
  • Superb bright translucency  

Application

Air assisted airless spray.  

Coverage and film weight

150 - 300 ml/m², depending on applied wet film thickness per coat without overspray

Wet film thickness: 2 x 150 µm or 1 x 150 up to maximum of 300 µm

We recommend applying two layers of each colour shade. 

Drying times at 23°C / 50% RH.

Dust dry approx, 60 minutes  

Sandable approx, 4 hours  

Recoatable approx, 4 - 6 hours  

The drying process of the coating depends on the applied film thickness and may be delayed when using timber with a high extractive contents or drying in

damp/cold conditions. During the drying process, always ensure for adequate temperature and ventilation. If the drying conditions are not met, damages

within the coating cannot be excluded.

Cleaning

Clean equipment immediately after use with clean cold water followed by a solution of Sikkens ST 830 and fresh lukewarm water.

Rinse with clean fresh water to remove all traces of contamination.

Note: Timbers which contain extractives i.e Oak, Larch or tropical woods can cause discolouring - these can appear after weathering.  Please call us for advice.

Features
NWF960
FAQS

questions james cooper
Question: 

What tip size is best for spraying this product (Air Assisted Airless)

Answer: 

Hello,

11-13 thou would be the recommended tip range for this product.

Holman Paints Team.


Question about the product

* Required fields
Send Question
All Colour Charts
Related products
Recently Viewed

Menu

Settings

Need help? Call 01793 511537