Sikkens Rubbol WF 3310 Exterior Opaque Wood Finish


Sikkens Rubbol WF3310, Semi-matt and Semi-gloss finish

High performance joinery finishes for brush application.

Offers exceptional durability and protection 

Moisture Vapour Permeable with extended flexibility

Prevents cracking, blistering & peeling 

For use on both interior & exterior joinery  

Excellent flow and levelling

Available in any colour 

Part of the High Performance Sikkens Professional Joinery range

£15.97 (excl VAT)
Colour choice
Please enter your required colour into the box below and click 'Save Colour Choice'.
  • 250 char. max
  • 1L
  • 2.5L
  • Semi-Matt
  • Semi-Gloss

About Sikkens Rubbol WF 3310 Brush applied topcoat for wood. 

For the ultimate protection of your exterior woodwork. 

Exceptional durability and colours stay brighter and cleaner for longer

All new, specially created formula for application by brush.

Sikkens Rubbol WF 3310 offers exceptional coverage and hiding power whilst remaining moisture vapour permeable and flexible.

Does not crack, peel or blister.

Easy to apply and quick drying. 

For best results we recommend a three coat system - One primer and two topcoats. 

Primer - Apply one coat of the Sikkens Rubbol WP 105 Primer

Apply two coats of Sikkens Rubbol WF 3310 Topcoat 

Ideal for use on wooden windows, doors, sheds, timber cladding.

Can be tinted to a very large number of colours, from any colour card or range. 


Method Brush or roller. 

Please see our How to Guidance Note for more advice on preparation and application for painting exterior woodwork. 

Approximate coverage rate

7m²/ litre, depending on the texture of the surface.

Drying times at 23°C / 50% RH.

Dust dry approx. 60 minutes  

Sandable approx. 4 - 5 hours  

Recoatable approx. 4 - 5 hours  

The drying process of the coating depends on the applied film thickness and may be delayed when using timber with a high extractive contents or drying in

damp/cold conditions. During the drying process, always ensure for adequate temperature and ventilation. If the drying conditions are not met, damages

within the coating cannot be excluded.

Cleaning & Thinning

Thin with a maximum 5% Water. 

Clean equipment immediately after use with lukewarm water. Rinse with clean fresh water to remove all traces of contamination.

Special Note

When coating hardwood, we recommend using a pore filling midcoat.

When using the light shades on timber with high extractive contents (e.g., Meranti, larch, oak) discolouration due to moisture may appear. Please call us for advice.

No comments

Review this Product

  • Product Rating:
Colour Charts

Be the first to ask a question about this product!

Question about the product

* Required fields
Send Question
Recently Viewed



Need help? Call 01793 511537