About Rust-Oleum Hard Hat Metallic Topcoat
Rust-Oleum Hard Hat Aerosol Metallic Topcoats are formulated on metallic pigments and are lead - chromate free.
The coating needs to be applied over Hard Hat 2169 / 2182 Primers or properly prepared painted substrates and can be overcoated with Hard Hat 2500 clear coat for even greater durability.
They are suitable for small maintenance jobs or for touch-up and in light industrial exposures, manufacturing and construction environments.
- Gloss or sparkling metallic appearance
- Restores the metallic look on metal objects
- Finish with Clear Topcoat 2500 for maximum gloss and durability
- For use on bare metal, galvanising, zinc and anti rust primers
Remove dirt, grease, oil, loose rust and all other surface contaminants using ND14 Cleaner Degreaser.
Prime or spot prime with the recommended RUST-OLEUM Primers.
Sand intact coatings to provide a proper key for adhesion.
The surface must be clean and dry during application.
Shake vigorously for at least one minute after the rattle of mixing ball is heard.
Shake frequently during use.
Hold can at least 25 cm from surface.
Use back and forth motion keeping can parallel with surface.
Ensure that can is in motion when spray button is pressed to avoid runs and sags.
Apply several thin layers at a few minutes interval to achieve adequate coating thickness.
After use turn can upside down and press spray button for 2 - 3 seconds to clean the valve.