About Rust-Oleum Hard Hat Topcoat
Hard Hat Aerosol Topcoats are high performance spray enamels.
They are suitable for small maintenance jobs or for touch-up in light industrial exposures, normal humidity and interior applications.
Ideal for refurbishing agricultural equipment, machinery and pipe work.
- High coverage rate
- Longer lasting than most other spray enamels
- Provides a higher film build for greater hiding power
- Resists chipping, cracking and peeling
- High gloss finish with excellent colour retention
Remove dirt, grease, oil, loose rust and all other surface contaminants using ND14 Cleaner Degreaser.
Prime or spot prime with the recommended RUST-OLEUM Primer.
Sand intact coatings to provide a proper key for adhesion.
The surface must be clean and dry during application.
Application and Thinning
Shake vigorously for at least one minute after the rattle of mixing ball is heard.
Shake frequently during use. Hold can approx. 25 cm from surface.
Use back and forth motion keeping can parallel with surface.
Ensure that can is in motion when spray button is pressed to avoid runs and sags.
Apply several thin layers at a few minutes interval to achieve adequate coating thickness.
After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.
Special note, Bright topcoats may need a light coloured primer/intermediate coat.