About Rust-Oleum Hard Hat Adhesion Primer 2102
- Ready to recoat after just 30 minutes
- High coverage rate 5.5 m2 per aerosol
- Wide angle spray pattern
- Coat with HARD HAT topcoat
Remove dirt, grease, oil and all other surface contaminants using ND14 Cleaner Degreaser.
Remove previous coatings completely.
The surface must be clean and dry during application.
Shake vigorously for at least one minute after the rattle of mixing ball is heard.
Shake frequently during use.
Hold can at least 25 cm from surface.
Use back and forth motion keeping can parallel with surface.
Ensure that can is in motion when spray button is pressed to avoid runs and sags.
Apply a single, thin layer and avoid application of thick layers.
After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.