About Rust-Oleum Hard Hat Anti-Corrision Primer 2169/2182 Aerosol
Quick Drying anti-rust primer for lightly rusted steelwork.
- Ready to recoat after just 10 minutes and can be handled after 30 minutes
- For new or slightly rusty surfaces
- Penetrates deep into the surface and does not give rust a chance to re appear
- Lead and chromate free
Remove dirt, grease, oil, loose rust and all other surface contaminants using ND14 Cleaner Degreaser.
Sand intact coatings to roughen the surface slightly.
The surface must be clean and dry during application.
Shake vigorously for at least one minute after the rattle of mixing ball is heard.
Shake frequently during use. Hold can approx. 25 cm from surface.
Use back and forth motion keeping can parallel with surface.
Ensure that can is in motion when spray button is pressed to avoid runs and sags.
Apply several thin layers at a few minutes interval to achieve adequate coating thickness.
After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.
For a brushable version, see CombiPrimer.