About Rust-Oleum Metal Cladding Topcoat
Rust-Oleum Metal Cladding Topcoat is a waterborne, semi gloss finish with a high filling and hiding power.
It can be applied in one or two coats to almost any cladding system.
Substrates include most synthetic materials such as powder coatings, polycarbonates and hard PVC as well as a range of metallic substrates including galvanizing, aluminium, copper, zinc and lead.
- Easy to clean and to maintain
- High filling and hiding power
- Excellent flow out
- Quick drying
- Low VOC
- Long lasting finish and excellent UV-resistance
Metal Cladding Topcoat can be applied directly on substrates primed with Metal Cladding Primer, NOXYDE or PEGANOX Metal Cladding Primer and Topcoat can also be applied on old sound paintwork.
Remove organic growth with AMW mould removal solution and degrease with ND14 cleaner degreaser and allow to dry thoroughly.
Abrade to create a key.
Application and Thinning
Brush, apply in 2 coats, if necessary dilute with water.
Roller, apply in 2 coats, use a short pile roller and if necessary dilute with water.
Air-atomised spray, not recommended.
Airless spray, Nozzle, 018 / Pressure: 180 bars.
1 coat is sufficient in most cases.
If necessary dilute with water.
The product can remain a little sticky if it is used on new cladding