Tikkurila Hydrosol Penetrating Masonry Primer

Brand:
Reference:
V61

A masonry sealer utilising the latest water borne coatings technology.

£10.67 (excl VAT)
£12.80 (incl VAT)
£10.67 (tax excl.)
Size
  • 1L
  • 2.5L
  • 5L
  • 10L
Description

About Tikkurila Hydrosol Primer

A nano particle sized acrylate wall primer ideal for stabilising new or previously treated interior or exterior masonry surfaces in residential, commercial and storage premises. Hydrosol Primer penetrates well into the surface, strengthens the substrate, evens out its absorbency and improves the adhesion of the finishing paint.

Surface Preparation

Surfaces must be clean, dry, and free from grease, dirt, oil, wax, rust, loose material and surface contamination. Use Tikkurila products for mould removal and cleaning. Repair surface defects holes and cracks with a good quality repair filler or mortar.New plastered surfaces need to left at least 6-8 weeks to cure and dry out before treatment.

Application and Thinning

Recommended method, apply with a low-pressure spray ("Backpack garden sprayer"). Hydrosol can also be applied by brush or roller. Apply Hydrosol Primer un-thinned For very porous or chalky surfaces apply, thinned with water (ratio 1:1) To gauge whether there has been sufficient primer applied can be assessed when the primer has absorbed into the substrate’s pores and does not leave a glossy, varnish like film on the surface. The primed surface can be treated the next day. Do not apply Hydrosol Primer on a wet or non-absorbing surface.  

Features
V61
Drying Time - Touch Dry
1hr
Drying Time - Recoat
24hrs
Coverage (m2 / litre)
4-8
Application
Brush, Roller, Spray
Single / Two Pack
Single
Water Based
Yes
Reviews
No comments

Review this Product

  • Product Rating:
Colour Charts
FAQS

Be the first to ask a question about this product!


Question about the product

* Required fields
Send Question
Recently Viewed

Menu

Settings

Need help? Call 01793 511537