Repair Care Dry Fix 4 Wood Stabiliser


A penetrating primer used on sound, clean and fresh timber prior to the application of Dry Flex 4 high performance elastic epoxy repair compound.

£21.21 (excl VAT)
£25.45 (incl VAT)
£21.21 (tax excl.)
  • 120ml
  • 300ml

About Repair Care Dry Fix 4 Wood Stabiliser

A penetrating clear primer that binds the repair and bonds with the DRY FLEX repair compound

  • Low viscosity
  • Penetrates more quickly and more deeply into the wood
  • Strengthens the fibres of the wood
  • Easy brush application

After application can be left up to 2 hours before application of DRY FLEX 4

Surface Preparation

Check the moisture content of the surface (maximum 18%)

Ensure that all decayed or excessively soft wood and weathered, damaged or burnt wood is completely removed until a sound wood substrate is achieved.

All surfaces must be free of dust, dirt, grease, raised wood fibres and general surface contamination.

Remove any paint coatings from the surfaces to be treated and sand back to bare shiny wood.

Sand the wood surface before the product is applied.

Allow a minimum of 20 minutes and a maximum of 2 hours for the DRY FIX 4 to penetrate the surface of the timber.

Remove any excess DRY FIX 4 which has not penetrated into the wood with absorbent paper

No comments

Review this Product

  • Product Rating:

Be the first to ask a question about this product!

Question about the product

* Required fields
Send Question
Colour Charts
Recently Viewed



Need help? Call 01793 511537