About Rust-Oleum Dacfill Waterproofing
Dacfill forms a long lasting rubber-like coat without joints or seams on all types of roofs with a slope of more than 1%.
- Resistant to UV radiation, acid rain, heat, frost and pollution
- Easy to apply with a brush, roller or airless spray
- Ideal for roofs and chimney slabs with a minimum slope of 1%
- Barely flammable and self-extinguishing
Dacfill can be reinforced with Dacfill-fleece for even greater mechanical performance
Surface Preparation
The substrate must be clean and dry, free from flakes, gravel, dust and dirt. Fill up joints with Elastofill, bridge active cracks with "Dacfill bridging fleece" and apply one of the following priming coats:
- On porous concrete, hard PVC and polyester use Primer 44 HS;
- On very smooth concrete: Noxyde diluted with 25% water;
- On iron and steel: undiluted Noxyde.Roofing or bituminous materials more than 1 year old can be coated directly with Dacfill.
- Zinc, galvanised steel, copper, lead and aluminium can be recoated with Dacfill after the surface has been degreased and lightly sanded.
Application and Thinning
Brush: Use a wide masonry brush or similar. If necessary dilute with water.
Roller: Use a long pile roller and dilute with water to ease application.
Air-atomised spray: Not recommended.Airless spray: Nozzle: 18 - 23 / Pressure: 220 bars
Do not apply on tar, soft PVC or bituminous materials less than 1 year old.
The use of the Dacfill-Fleece is necessary for any roof with a slope < 5%, in case of water pooling and when there is a potential for minor movements of the roof.
Key Features
- For many sloped (min. 5%) roof types: bitumen, cementitous, asphalt, plastics
- 100% watertight high build coating
- Resistant to UV radiation, acid rain, heat, frost and pollution
- Approved for asbestos encapsulating
- Safe and easy to use
- Easy to apply with a brush, roller or airless spray
- Watertight water-based liquid membrane for roofs. Forms a lasting elastic coat without joint or seams on sloping roofs.
