Top sellers

Cetol WP 567 BPD Impregnating Primer

New product

A translucent, impregnating base stain for protection against bluestain, fungi and rotting.

Impregnates and Primes in one coat.

Available in clear (colourless) and more than 20 colours from the sikkens Classic Colours Collection.

Can be used under paints and semi-transparent wood finishes.

  

 

 

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537

ENTER COLOUR CHOICE:

loader

£12.23

- +

 
Product Info

Cetol WP 567 BPD - Primes and impregnates in one

Ready to use from the container

Penetrates deep into the timber

Good run off properties

Good UV protection

 

Active ingredient

The active substance are notified acc. guildlines 98/8/EG. and according to the specification EN 599 against blue stain and rot.

BAUA-register Nr. 40653

0,6 g/100 g propinylbutylcarbamate iodine

0,9 g/100 g propiconazol

0,3 g/100 g Tebuconazal

 

Wood protection agents must be registered according to the BPD. (BPD = Biocide Product Directive)

Uptake consumption The examination follows the uptake value: 120-160 ml/m² i.e. 123-164 g/m² for timber in the resistance classes 3-5

 

Application Method

 Dipping or Flow Coat

Working viscosity is approximately  11 seconds in a DIN cup 4 mm i.e. approx. 23 - 25 seconds in a ISO cup 3 mm at 20° C material temperature.

 

Brushing machine, vacuum coater

Consumption 50 - 160 ml/m², depending on application method, type and absorption properties of wood (exact values must be established through a sample)

 

Thinning  Do not thin

Application temperature  15-25 °C for substrate, air and material at approx.60 % R.H.

Drying times  At standard atmosphere of 23 °C / 50 % rel. humidity of air DIN 50014

Dust-dry  after approx. 30 minutes

Over paint  after approx. 4 - 6 hours with waterborne products

 

Cleaning of equipment    Clean directly after use with water or washing up liquid or with

ST 830* (cleaning agent).

Storage A dipping tank containing material must be covered correctly and stirred or circulated regularly.

 

Packaging Disposal  Only residue emptied cans can be disposed via recycling. Liquid wastes must be disposed of according to national regulations or according to EU-disposal key 03 02 02.

 

Hazard identification  In accordance with EC guidelines -

Warning.  The Impregnation serves as a protection of none statically subjected wooden constructions without earth contact, exterior, against blue stain and rot according to DIN 68800, part 3.

Not for use with wood which has got direct contact with food or food preparation.

 

Dipping tanks or reservoirs  When using metal reservoirs, we recommend using none rusting steel i.e. V2A, the use of other materials can lead to corrosion.

Biocide products must be handled carefully

 

VOC guideline  EU limit value for this product (Kat. A/f): 150 g/l (2007)/130 g/l (2010).

This product contains max. 80 g/l VOC.

 

 

 

 

 
Technical Data
Application Spray
01.Drying Time (Touch Dry) 30 minutes
02.Drying Time (To handle) 4 hours
03.Drying Time (Recoat) 4 - 6 hours
Type Single Pack
 
Download

Cetol WP 567

Technical Data Sheet

Download PDF

Cetol WP 567 MSDS

Health and Safety Data

Download PDF
 
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:

loader

* required fields

Write a review

Cetol WP 567 BPD Impregnating Primer

A translucent, impregnating base stain for protection against bluestain, fungi and rotting.

Impregnates and Primes in one coat.

Available in clear (colourless) and more than 20 colours from the sikkens Classic Colours Collection.

Can be used under paints and semi-transparent wood finishes.

  

 

 

Write a review

Accessories

30 other products in the same category:

Menu

Top
Compare 0