£57.06 (incl VAT)
Rust-Oleum Epoxyshield Sealer
Water based, single pack, dust-proofer.
Concrete sealer based on a vinyl acrylic binder.
It reduces dust production and simplifies cleaning.
Easy to apply.
Non-yellowing clear finish (gloss).
Touch dry after just 1 hour.
Ideal primer for EpoxyShield Ultra coatings.
£57.06 (incl VAT)
About EpoxyShield Sealer
EpoxyShield Sealer is a 1-component, concrete protector. It has excellent penetrating properties and good durability for light traffic. It protects the floor against liquid / chemicals and simplifies cleaning.
- Single pack, easy to apply
- Non yellowing clear finish (gloss)
- Protects against moisture and road salts
- Touch dry after just 1 hour
- Ideal primer for EpoxyShield ULTRA coatings
Surface Preparation
Apply the product only on fully clean and dry concrete surfaces.
Do not apply on smooth or very dense concrete or concrete which contains curing compound.
Remove all oil, grease and other dirt using ND14 Cleaner Degreaser.
New concrete needs to cure for minimum of 30 days.
Loose or unsound concrete should be removed by blasting, cutting or etching with RUST-OLEUM Surfa-Etch 108 Etching Solution.
Repair all holes and cracks with Rust-Oleum concrete repair products.
Very dense and smooth concrete should first be abrasive blasted, or primed with Rust-Oleum 333 Adhesion Primer.
During application the substrate should be clean and dry.
When EpoxyShield Sealer is used as a finish, apply 2 coats.
EpoxyShield Sealer can also be used as a sealer/impregnation primer for EpoxyShield® 5200 ULTRA.
Apply the sealer on bare and clean concrete floors.
Application and Thinning
Brush, product is ready for use. Thinning is not necessary.
Roller, product is ready for use. Thinning is not necessary.
- Drying Time - Touch Dry
- 1hr
- Drying Time - To Handle
- 6hrs
- Drying Time - Recoat
- 6hrs
- Drying Time - Full Cure
- 12hrs
- Coverage (m2 / litre)
- 10
- Application
- Brush, Roller
- Single / Two Pack
- Single
- Finish
- Gloss
- Water Based
- Yes