Top sellers

New

Zinsser AllCoat Water Based Multi-Surface Primer Sealer and Finsih

New product

Zinsser Multi Surface Primer and finish is a water based universal paint for most interior surfaces.

Ideal for plasterboard, wood, masonry

High Opacity with a Flat Matt finish

Does not raise the grain on new timber

Sands quickly and easily in just 1 hour

Easy spray formula for airless application

Available in any colour

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537

ENTER COLOUR CHOICE:

loader

£75.40

- +

Brand: Zinsser

 
Product Info

Zinsser Allcoat Primes and finishes most interior surfaces in one.

· Ideal for plasterboard, wood, masonry

· High Opacity with a Flat Matt finish

· Does not raise the grain on new timber

· Sands quickly and easily in just 1 hour

· Easy spray formula for airless application

· Flash rust resistant on metal

· Clean up with soapy water

Zinsser Allcoat is ideal for newly cured plaster, drywall, cement, poured concrete, stucco, wood or metal doors, windows, paneling and trim; aluminum and glean galvanized metal, PVC, glossy laminates and other interior surfaces.

Zinsser AllCoat is compatible over and under all alkyd and acrylic paints.

Zinsser Allcoat is fast drying with very low odour and is great for brush, roller or spray application.

Surface Preparation; Surfaces should be clean, dry, sound and free of dust, dirt, excessive chalky material, grime, grease, oil, wax, mildew, wallpaper adhesive or any contamination that may interfere with adhesion. If unsure use a clearner/degreaser.

Remove any loose and flaking paintwork and sand to a fine edge. Remove interior mildew with an interior mildew cleaner, such as Zinsser Mould Killer & Remover.

Manual or mechanically abrade rusty metal. Clean new galvanized metal with methylated spirit to remove processing oil.

Spot prime knots and sap streaks with Zinsser B-I-N® Primer Sealer before priming full surface with AllCoat.

Coverage rate;

Approximately 10 m2/L on a sealed, non-porous surfaces. Note that very porous surfaces may require two coats. 

Application;

Ready to use – no dilution necessary.

Stir before using. In most cases only one coat is necessary. Porous surfaces may require two coats.

Apply using a synthetic brush, roller, pad applicator, airless sprayer.

Spraying: 0.013” to .017” tip at 2000 to 25000 P.S.I. Thinning: Up to 10% clean water – stir well

 
Technical Data
01.Drying Time (Touch Dry) 1 Hour
03.Drying Time (Recoat) Sand and recoat in 2 hours
04.Drying Time (Full cure) 7 Days
Coverage (kg/m2) 9m per litre
 
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:

loader

* required fields

Write a review

Zinsser AllCoat Water Based Multi-Surface Primer Sealer and Finsih

Zinsser Multi Surface Primer and finish is a water based universal paint for most interior surfaces.

Ideal for plasterboard, wood, masonry

High Opacity with a Flat Matt finish

Does not raise the grain on new timber

Sands quickly and easily in just 1 hour

Easy spray formula for airless application

Available in any colour

Write a review

Accessories

30 other products in the same category:

Menu

Top
Compare 0