Top sellers

Dry Fix 4 Wood Stabiliser

New product

A penetrating primer used on sound, clean and fresh timber prior to the application of Dry Flex 4 high performance elastic epoxy repair compound.

More details

£33.86

- +

 
Product Info

A penetrating clear primer that binds the repair and bonds with the DRY FLEX repair compound
• Low viscosity
• Penetrates more quickly and more deeply into the wood
• Strengthens the fibres of the wood
• Easy brush application
• After application can be left up to 2 hours before application of DRY FLEX 4
• Maximum compatibility with DRY FLEX 4
• Simple and clean to mix


Surface Preparation
Check the moisture content of the surface (maximum 18%)
Ensure that all decayed or excessively soft wood and weathered, damaged or burnt wood is completely removed until a sound wood substrate is achieved.
All surfaces must be free of dust, dirt, grease, raised wood fibres and general surface contamination.
Remove any paint coatings from the surfaces to be treated and sand back to bare shiny wood.
Sand the wood surface before the product is applied.
Allow a minimum of 20 minutes and a maximum of 2 hours for the DRY FIX 4 to penetrate the surface of the timber.
Remove any excess DRY FIX 4 which has not penetrated into the wood with absorbent paper

 
Technical Data
Application Brush
Type Two Pack

Write a review

Dry Fix 4 Wood Stabiliser

A penetrating primer used on sound, clean and fresh timber prior to the application of Dry Flex 4 high performance elastic epoxy repair compound.

Write a review

Accessories

30 other products in the same category:

Menu

Top
Compare 0