Top sellers

New

Teknos Rensa Facade Cleaning Solution

New product

Rensa Facade is an efficient detergent for washing external surfaces of buildings and pre-treating surfaces before painting. It removes dirt, mould, algae growth and other impurities which may weaken the adhesion of the paint. It can be used on all constructional surfaces, which endure cleaning with water.

More details

£5.80

- +

Brand: Teknos

 
Product Info

Rensa Facade is an efficient detergent for washing external surfaces of buildings and pre-treating surfaces before painting. It removes dirt, mould, algae growth and other impurities which may weaken the adhesion of the paint. It can be used on all constructional surfaces, which endure cleaning with water.

Rensa Facade is an efficient detergent for washing external surfaces of buildings
and pre-treating surfaces before painting. It removes dirt, mould, algae growth and
other impurities which may weaken the adhesion of the paint.

It can be used on all constructional surfaces, which endure cleaning with water: wood, concrete, plaster etc. and old painted surfaces. Because the detergent does not harm the most common paint surfaces, it can also be used diluted as a maintenance cleaner.

 Rensa Facade is environmentally friendly and biodegradable. It meets the requirements by OECD and by the Detergent regulation of European Parliament and the Council on detergents for biodegradability (OECD 301B, EC 648 /2004).

Direction For Use
Dilute Rensa Facade with water depending on the purpose of its use:
For washing of and pre-treating surface to be painted: 1 : 10 (1 litre of detergent to 10 litres
of water)
For very dirty/mildewed surfaces: 1 : 1 – 1 : 5
For maintenance cleaning: 1 : 15 – 1 : 20
Wet porous surfaces, such as untreated wood, plaster etc., with water before applying the
detergent. This prevents the detergent from absorbing too much and drying too fast.
Apply the detergent to the surface to be cleaned by using e.g. a brush or low-pressure spray
(so-called garden spray). Let it act for about 20 minutes. Enhance the cleaning effect by
brushing. The detergent must not dry on the surface to be cleaned - wet the surface again
with the washing fluid, if needed. Rinse the surface thoroughly with clean water. When using a pressure washer avoid excessive wetting of the wooden structures, such as weatherboards and outer walls.

Protection

Rensa Facade is an efficient, but environmentally friendly and biodegradable product.
However, using the detergent must be followed with a reasonable caution.
Avoid skin contact and breathing the spray mist. Protect eyes from splashes. See Material Safety Data Sheet.
The detergent does not harm garden plants, but avoid unnecessary splashing. The most
sensitive plants can be covered or wetted with water before the treatment.
The detergent does not harm the surfaces to be cleaned, but avoid unnecessary splashing.
For the most delicate materials, e.g. textile surfaces, must be ensured efficient protection
and suitability of the product by testing the effects on a small, unnoticeable area of the
surface to be treated.

 

 
Technical Data
Coverage 50 m2/ 1 litre undiluted detergent
Application Brush or low pressure spray
Dilution rate 1:10 (1 litre of detergent to 10 litres of water) for washing and pre-treating prior to painting, very dirty/mildewed 1:1 - 1:1.5, maintenance 1:15 - 1:20
Approvals and Certificates It meets the requirements by OECD and by the Detergent regulation of European Parliament and the Council on detergents for biodegradability (OECD 301B, EC 648/2004).

Write a review

Teknos Rensa Facade Cleaning Solution

Rensa Facade is an efficient detergent for washing external surfaces of buildings and pre-treating surfaces before painting. It removes dirt, mould, algae growth and other impurities which may weaken the adhesion of the paint. It can be used on all constructional surfaces, which endure cleaning with water.

Write a review

Accessories

30 other products in the same category:

Menu

Top
Compare 0