Top sellers

Tikkurila Valtti Base

New product

Tikkurila Valtti Base is a traditional pre-treatment priming oil for use on exterior wood. 

The Valtti Base absorbs into the wood and slows the adverse effects of moisture and microbial growth.

Protects and primes timber and wooden structures before treatment. 

Suitable for sawn and planed timber, woodwork, logs and thermally treated and impregnated wood. 

Brush or dipping application. 

More details

£11.34

- +

 
Product Info

Tikkuirla Valtti Base Pre-treatment Priming Oil

The Tikkurila Valtti Base is an oil based pre-treatment for bare exterior wood prior to the application of Valtti Wood Finishes and Tikkurila Paints. It is absorbed into the wood retarding the adverse effects of weathering, moisture, and microbial growth.

 

Surface Preparation
Surfaces must be clean, dry, and free from grease, dirt, oil, wax, loose material and surface contamination. Use recommended Tikkurila products for mould removal and cleaning. Fill cracks, joints, nail holes, with a good quality wood filler.
Ensure that timber cladding, weather boarding and timber glazing beads are adequately fastened with non-corrosive fixings.


Application and Thinning
Methods: brushing or dipping.

Application Conditions: All surfaces to be painted must be dry, the moisture content of the wood below 20%, and with the temperature of the air at least +5OC, and the relative humidity of the air below 80%.

Thinning: Valtti Base normally requires no thinning.

Touch Dry: 1/2 an hour

Re-coat:  24 Hours

As it is a clear pre-treatment product, Valtti Base will not protect wood from the adverse effects of sunlight and therefore should be over-coated as soon as is possible with Valtti Wood Finishes or Tikkurila Exterior Wood Paints. 

 

 
Technical Data
Finish Matt
Solvent Based Yes
01.Drying Time (Touch Dry) 1/2 hour
03.Drying Time (Recoat) 24 hours
Smooth Coverage (m2 / litre) 8-10
Type Single Pack
Application Method Brush, Dip
Rough Coverage (m2 / litre) 4-5
Thinning Do not thin

Write a review

Tikkurila Valtti Base

Tikkurila Valtti Base is a traditional pre-treatment priming oil for use on exterior wood. 

The Valtti Base absorbs into the wood and slows the adverse effects of moisture and microbial growth.

Protects and primes timber and wooden structures before treatment. 

Suitable for sawn and planed timber, woodwork, logs and thermally treated and impregnated wood. 

Brush or dipping application. 

Write a review

Accessories

30 other products in the same category:

Menu

Top
Compare 0