Bactericidal 2-component water dilutable epoxy coating for the coating of floors in areas where controlled hygienic conditions are of essential importance and where high abrasion resistance is needed.
Very hard and provides exceptional abrasion resistance
Resistant to oils and solvents
Easy to clean.
Helps to maintain a hygienic environment.
The substrate should be dry and clean,
Biosan Ultra can be applied directly on most mineral substrates (old concrete, tiles, glass,)
Curing compounds in case of poly-concrete have to be removed by means of grit blasting.
On new concrete or non-porous concrete, remove cement grout by grit blasting or treatment with Rust-Oleum Surfa Etch 108.
Biosan Ultra cannot be applied on a flexible paint coat or a moving substrate.
Application and Thinning
Roller/Brush: Dilute 1st coat with max. 10% water.
Apply 2nd coat preferably undiluted.
Air-atomised spray: Not recommended.
Airless spray: Nozzle: 021 - 023 / Pressure: 220 bars.
1st coat: dilute with max. 10% water. 2nd coat: dilute with max. 5% water.