Top sellers

HVP 200 Waterborne Masonry Gloss Coating

New product

A quick drying, waterborne, high performance, tough and abrasion resistant smooth protective and decorative coating.

The gloss sheen and clarity of colour remain long after similar solvent based gloss coatings have faded. 

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537

ENTER COLOUR CHOICE:

loader

£45.50

- +

 
Product Info

A quick drying, waterborne high performance, tough and abrasion resistant smooth protective and decorative coating.

The gloss sheen and clarity of colour remain long after similar solvent based gloss coatings have faded.

It is moisture vapour permeable and easy clean.

It can be applied by brush, roller and spray and is suitable for use on most exterior masonry surfaces.

It is ideal for masonry, brick and block work, cement render, pebbledash, plaster, concrete, plasterboard and wooden panels.

HVP200 is available in any colour, including British Standard, RAL, NCS and Trade/Retail Paint colour collections.

Surface Preparation

HVP200 Masonry Gloss Coating can be applied directly on old (sound) paintwork after thorough brushing down. Remove any friable or loose coatings.

Remove any signs of mould growth with RustOleum AMW mould removal solution.
Chalking paints or substrates must be treated first with RustOleum Primer 44HS or stabilising solution.

New or unpainted substrates: 
On porous materials apply first a coat of RustOleum Primer 4HS.
On smooth non-porous substrates apply a coat of RustOleum Pegalink Primer
Any holes or cracks > 0.5 mm wide: Rake out and fill with Prestonnet High Performance Masonry Movement cracks need to be bridged with RustOleum Murfill Fleece prior to application.

Wash sound gloss painted surfaces with cleaner degreasing solution to remove any contaminants frequently changing the water and abrade to create a key.

Application 

HVP200 is supplied ready for use.

Apply two coats by Masonry brush, medium or long pile roller.    

Airless Spray application, spray settings Minimum Fluid pressure 2000 psi (136bar) and tip size 0.018.

Please note that application to surfaces in direct sunlight that have become hot will greatly affect the application characteristics of the Masonry Gloss

 
Technical Data
Finish Gloss
Application Brush, Roller or Spray
Waterbased Yes
01.Drying Time (Touch Dry) 40-60 minutes
03.Drying Time (Recoat) 4 hours
Smooth Coverage (m2 / litre) 8-10
Type Single Pack
 
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:

loader

* required fields

Write a review

HVP 200 Waterborne Masonry Gloss Coating

A quick drying, waterborne, high performance, tough and abrasion resistant smooth protective and decorative coating.

The gloss sheen and clarity of colour remain long after similar solvent based gloss coatings have faded. 

Write a review

Accessories

29 other products in the same category:

Menu

Top
Compare 0