Rust-Oleum 7100 Floor Coating is a high quality, durable, single pack coating for light to medium traffic areas.
It has a High Gloss finish that is easily cleaned. The coating has a good resistance against abrasion and neutral detergents (no alkaline cleaning agents) and is resistant to short contact periods against lubricating oils, fuel, petrol etc.
Single pack, solvent based
For foot traffic, interior and exterior
To apply to old concrete, older than 2 years and metal
High film build in one coat
Touch dry after 6 hours
Easy to apply with brush and roller
Remove oil, grease and other contaminations with ND14 Cleaner Degreaser or with high pressure steam cleaning
Sand old, intact coatings to roughen the surface in order to establish a good adhesion
Check the compatibility with old intact coatings
During application the surface should be dry and clean
On porous concrete a first coat should be applied with 7100 diluted with 10% 7301 Special Thinners.
Remove curing compounds by means of dust free blasting.
Application and Thinning
Brush: Sparingly, if required, with 10% special thinners 7301.
Roller: Sparingly, if required, with 10% special thinners 7301.
In case of roller application it can be necessary to apply 2 coats in order to obtain the recommended film thickness.
Do not apply on alkaline substrates.
Important: Not Recommended for car traffic or for car park areas. For this application use Rust-Oleum EpoxyShield